Additives and Modifiers in composites

A wide variety of additives are used in composites to modify materials properties and tailor the laminate’s performance. Although these materials are generally used in relatively low quantity by weight compared to resins, reinforcements and fillers, they perform critical functions.

Additive Functions

Additive used in thermoset and thermoplastic composites include the following:

	Low shrink/low profile: when parts with smooth surfaces are required, a special thermoplastic resin, which moderates resin shrinkage, can be added to thermoset resins.
	Fire resistance: Combustion resistance is improved by proper choice of resin, use of fillers or flame retardant additives. Included in this category are materials containing antimony trioxide, bromine, chlorine, borate and phosphorus.
	Air release: most laminating resins, gel coats and other polyester resins might entrap air during processing and application. This can cause air voids and improper fiber wet-out. Air release additives are used to reduce such air entrapment and to enhance fiber wet-out.
	Emission control: in open mold applications, styrene emission suppressants are used to lower emissions for air quality compliance.
	Viscosity control: in many composite types, it is critical to have a low, workable viscosity during production. Lower viscosity in such filled systems is usually achieved by use of wetting and dispersing additives. These additives facilitate the wet-out and dispersion of fillers resulting in lower viscosity (and/or higher filler loading).
	Electrical conductivity: most composites do not conduct electricity. It is possible to obtain a degree of electrical conductivity by the addition of metal, carbon particles or conductive fibers. Electromagnetic interference shielding can be achieved by incorporating conductive materials.
	Toughness: can be enhanced by the addition of reinforcements. It can also be improved by special additives such as certain rubber or other elastomeric materials.
	Antioxidants: plastics are sometimes modified with antioxidants, which retard or inhibit polymer oxidation and the resulting degradation of the polymer.
	Antistatic agents: are added to polymers to reduce their tendency to attract electrical charge. Control of static electricity is essential in certain plastics processing and handling operations, as well as in finished products. Static charges on plastics can produce shocks, present fire hazard and attract dust. The effect of static charge in computer/data processing applications, for example, is particularly detrimental.
	Foaming agents: are chemicals that are added to polymers during processing to form minute cells throughout the resin. Foamed plastics exhibit lower density, decrease material costs, improve electrical and thermal insulation, increase strength-to-weight ratio and reduce shrinkage and part warping.
	Plasticizers: are added to compounds to improve processing characteristics and offer a wider range of physical and mechanical properties.
	Slip and blocking agents provide surface lubrication. This results in reduced coefficient of friction on part surfaces and enhances release of parts from the mold.
	Heat stabilizers: are used in thermoplastic systems to inhibit polymer degradation that results from exposure to heat.
	Ultraviolet stabilizers: both thermoset and thermoplastic composites may used special materials which are added to prevent loss of gloss, crazing, chalking, discoloration, changes in electrical characteristics, embrittlement and disintegration due to ultraviolet (UV) radiation. Additives, which protect composites by absorbing the UV, are called ultraviolet absorbers. Materials, which protect the polymer in some other manner, are known as ultraviolet stabilizers.